# SMART said PASSED with 2,184 uncorrectable errors

The hard drive in my NAS says `PASSED`. Then you read the attributes:

| Attribute | Raw |
|---|---|
| `5 Reallocated_Sector_Ct` | 26 |
| `187 Reported_Uncorrect` | 2184 |
| `197 Current_Pending_Sector` | 0 |
| `198 Offline_Uncorrectable` | 0 |
| `9 Power_On_Hours` | 11198 |

187 is Reported Uncorrectable Errors: 2,184 of them. Its normalised value had bottomed out at `001`. [Backblaze tracks it](https://www.backblaze.com/blog/what-smart-stats-indicate-hard-drive-failures/) as one of five SMART stats that point to a failing drive, and the overall status still says `PASSED`.

---

## 187 is a lifetime counter

It never goes down, so it can't tell you whether the drive is failing now or failed once, years ago. 197 is the present-tense one, sectors pending right now, and it was 0. So was 198.

So I tested it, three ways, on the box itself so the network wasn't the bottleneck:

- write 8 GB of random data through the filesystem, drop the cache, read it back, compare SHA-256
- `badblocks` over every sector of the raw device
- a SMART long self-test, the firmware's own full surface scan

All three passed, and none of the counters moved between before and after. Seven weeks later, after copying about 246 GB from a Windows drive onto the NAS, they still hadn't.

---

## The rule

So:

- it holds bulk and second copies only: downloads, media, scratch. never the only copy of anything.
- the SSD is the disk to trust
- `smartctl -t long` every few months, and retire it the moment 197 goes above 0 or 5 starts climbing

<!-- diagram -->
